|
Stop
off paint for gas carburizing up to 3
mm
|
| •
without
solvents |
 |
| •
environment
friendly and
fragrance-free |
| •
viscosity
and course may be
adjusted by water |
| •
drying
time appr. 30
minutes only |
| •
good
protection
properties |
|
|
|
... |
|
Application:
|
LUISO
W33 is a
fragrance-free and solvent-free
stop-off paint for gas carburizing. It
provides good protection properties
against carbon depths up to max.
3,0 mm. The
stop off paint is delivered ready for
painting. For dipping or spraying we
recommend LUISO W34.
.
|
Before
using, LUISO
W33 should
be stired up shortly and then applied
with a paint brush. The work pieces to
be treated must be free of grease and
dirt! One layer is suficiant. To avoid
evaporation the cans should be sealed
hermetically after use. To restore
normal viscositiy the stop off paint
can be diluted by adding up to 2 %
water. No special thinners are
necessary.
|
 |
| . |
|
 |
The
dry off time for LUISO
W33 is 30
minutes. Unwanted paste residues may
be removed easily with water. The heat
treatment with LUISO
W33 should
not exceed temperatures above 970 °C.
|
After
heat treatment LUISO
W33 residues
may be removed by brushing or by
sandblasting.
|
|
|
|
Packing:
|
|
LUISO
W33 to
be delivered in PP-cans of 1, 5 or
10 kg.
|
|
|
|
Storage:
|
|
LUISO
W33 is
sensitive to frost. Storage at room
temperature is recommended. Opened
cans should be sealed hermetically
after use. Storage time should not
exceed 12 months.
|
