Stop
off paint for vacuum
carburizing |
| •
without
solvents |
|
| •
fragrance-free |
| •
viscosity
and
course
may be
adjusted
by water |
| •
drying
time
appr. 30
minutes
only |
| •
good
protection
properties |
| •
residues
can be
removed
by water |
|
|
|
...
|
| Application: |
LUISO
W44 is
a fragrance-free and
solvent-free stop off
paint for gas carburizing.
It provides good
protection properties
against carbon depths up
to max.
1,5 mm.
The stop off paint is
delivered ready for
painting. For dipping or
spraying we recommend
LUISO W45.
.
| Before
using, LUISO
W44 should
be stired up
shortly and then
applied with a
paint brush. The
work pieces to be
treated must be
free of grease and
dirt! One layer is
suficiant. To
avoid evaporation
the cans should be
sealed
hermetically after
use. To restore
normal viscositiy
the stop off paint
can be diluted by
adding up to 2 %
water. No special
thinners are
necessary. |
|
| . |
|
|
The
dry off time for LUISO
W44 is
30 minutes.
Unwanted paste
residues may be
removed easily
with water. The
heat treatment
with LUISO
W44 should
not exceed
temperatures above
970 °C. |
After
heat treatment LUISO
W44 residues
may be removed by using
water.
|
|
| Packing: |
| LUISO
W44 to
be delivered in PP-cans of
1, 5 or 10 kg. |
|
| Storage: |
| LUISO
W44 is
sensitive to frost.
Storage at room
temperature is recommended.
Opened cans should be
sealed hermetically after
use. Storage time should
not exceed 12 months. |
|
